Solar Charge Controller SolarX 4K
- Canada-wide shipping
- Secure payment
- Customer support 7 days a week
Low Stock Available
Usually ready in 2-4 days —
Solar Charge Controller SolarX 4K
Retours et garantie : politique du fabricant applicable. Voir la politique de retour.
Bluetti SolarX 4K Solar Charge Controller
The Bluetti SolarX 4K solar charge controller connects high-voltage solar arrays to compatible Bluetti power stations and battery systems. It accepts up to 4,200 W of solar input and converts PV voltage as high as 500 VDC into a stable low-voltage output, delivering up to 4,000 W of charging power.
This MPPT solar charge controller makes it possible to use residential-style rooftop panels and higher-voltage solar arrays with compatible Bluetti energy systems. Its isolated MPPT architecture continuously optimizes solar production as sunlight conditions change, helping maximize the amount of usable energy stored throughout the day.
- Maximum solar input: Up to 4,200 W.
- Maximum open-circuit voltage: 500 VDC.
- Startup voltage: 150 VDC.
- MPPT operating range: 120–450 VDC.
- Number of MPPT controllers: 1.
- Rated input current: 13 A.
- Maximum input current: 17 A.
- Output power: Up to 4,000 W.
- Output voltage: 35–58 VDC.
- Maximum output current: 80 A.
- MPPT efficiency: Up to 99%.
- Compatibility: Apex 300, AC300, AC500, B300, B300K, B300S and selected Bluetti battery systems.
- Communication: CAN 2.0, Bluetooth and Wi-Fi.
- Protection rating: IP21.
- Operating temperature: -20°C to 55°C, with output derating above 45°C.
- Dimensions: Approximately 288.4 × 474 × 90.2 mm.
- Weight: Approximately 7.6 kg.
- Warranty: 2 years.
The main advantage of this solar charge controller is its ability to work with high-voltage solar arrays that would normally exceed the direct PV input limits of a portable power station. This allows residential rooftop panels and larger ground-mounted solar arrays to be integrated with compatible Bluetti batteries and power systems.
The SolarX 4K converts high-voltage solar input into a stable 35–58 V output suitable for supported Bluetti equipment. With MPPT efficiency of up to 99%, it is designed to capture as much usable solar energy as possible throughout the day.
Bluetti Solar Charge Controller Compatibility
The SolarX 4K solar charge controller supports several Bluetti products, including the Apex 300, AC300 and AC500 power systems as well as B300, B300K and B300S expansion batteries.
BLUETTI also lists compatibility with selected mobile and RV batteries, including the B4810, B1210 and B1232, when the appropriate output cable is used.
Different devices require different DC output cables. Depending on the connected product, the SolarX 4K can use P090A, P150D, XT60-F or dedicated terminal connections.
Scalable Solar Charging from 4 kW to 12 kW
Multiple SolarX 4K solar charge controllers can be used in larger Bluetti energy systems to increase total solar charging capacity.
BLUETTI shows a 4,000 W configuration with one Apex 300 and B300K, an 8,000 W setup using two Apex 300 units and two SolarX 4K controllers, and a 12,000 W system using three Apex 300 units, multiple B300K batteries, three SolarX 4K controllers and a Hub A1.
Reaching 8 or 12 kW therefore depends on the complete system architecture rather than simply connecting several controllers to one power station.
Home, Cottage and Off-Grid Applications
For homes or cottages with higher-voltage solar panels, this solar charge controller provides a practical way to use residential-style PV arrays while charging compatible Bluetti battery systems.
In an off-grid installation, up to 4,000 W of charging output can restore a large amount of stored energy during peak sunlight hours. This makes the SolarX 4K especially useful for larger backup systems, cottages and high-capacity off-grid setups.
The controller is also useful where rapid solar recovery is important between outages or during extended periods without grid power.
Monitoring with the BLUETTI App
The SolarX 4K includes Wi-Fi and Bluetooth connectivity for monitoring solar production and system operation through the BLUETTI app. CAN 2.0 communication also allows it to exchange operating information with compatible devices.
The app can be used to monitor the system in real time, receive firmware updates and assist with troubleshooting.
Practical Tips for the Bluetti SolarX 4K
Install the solar charge controller in a dry area protected from direct weather exposure. Its IP21 rating is not intended for direct exposure to rain or snow, so an indoor or properly sheltered location is required.
Before connecting the solar array, carefully verify its open-circuit voltage. The system must never exceed 500 VDC and should remain within the 120–450 VDC MPPT operating range during normal operation.
High-voltage solar systems can present serious electrical hazards. For permanent rooftop or residential installations, have the system designed and connected by a qualified installer.
Finally, make sure you select the correct output cable for the Bluetti power station or battery being used. Proper cable selection and solar-array sizing are essential for reliable and safe charging.
414 Boul Sir Wilfrid Laurier
Unité 320
Mont Saint Hilaire QC J3H 3N9
Canada
+14388425878
Pickup available, usually ready in 2-4 days
Comparison of Bluetti Portable Power Stations Based on Usage Time
| Model | Capacity (Wh) |
Power (W) |
Number of phone charges | Cooler (≈60 W) |
Computer (≈60 W) |
Coffee Maker (≈450 W) |
Microwave (≈1000 W) |
|---|---|---|---|---|---|---|---|
| AC2P | 230.4 | 300 | ≈23 | ≈3.8h | ≈3.8h | ≈0.5h | ≈14 min |
| AC50P | 504 | 700 | ≈50 | ≈8.4h | ≈8.4h | ≈1.1h | ≈30 min |
| AC70P | 864 | 1000 | ≈86 | ≈14.4h | ≈14.4h | ≈1.9h | ≈52 min |
| AC180P | 1440 | 1800 | ≈144 | ≈24.0h | ≈24.0h | ≈3.2h | ≈86 min |
| AC200PL | 2304 | 2400 | ≈230 | ≈38.4h | ≈38.4h | ≈5.1h | ≈138 min |
| Apex300 | 2764.8 | 3840 | ≈276 | ≈46.1h | ≈46.1h | ≈6.1h | ≈166 min |
| Handsfree 1 | 268.8 | 300 | ≈27 | ≈4.5h | ≈4.5h | ≈0.6h | ≈16 min |
| Handsfree 2 | 512 | 700 | ≈51 | ≈8.5h | ≈8.5h | ≈1.1h | ≈31 min |
Estimated Solar Recharge Time for Bluetti Power Stations
| Model | Capacity (Wh) |
60W | 100W | 120W | 200W | 350W | 2×200W | 2×350W | 3×350W |
|---|---|---|---|---|---|---|---|---|---|
| AC2P | 230.4 | ≈4.8h | ≈2.9h | ≈2.4h | ≈1.4h | Not supported | Not supported | Not supported | Not supported |
| AC50P | 504 | ≈10h | ≈6h | ≈5h | ≈3h | Not supported | Not supported | Not supported | Not supported |
| AC70P | 864 | ≈18h | ≈10h | ≈9h | ≈5h | ≈3h | ≈2h | Not supported | Not supported |
| AC180P | 1440 | ≈30h | ≈18h | ≈15h | ≈9h | ≈5h | ≈4h | Not supported | Not supported |
| AC200PL | 2304 | ≈48h | ≈28h | ≈24h | ≈14h | ≈8h | ≈7h | ≈4h | ≈2h |
| Apex300 | 2764.8 | ≈57.6h | ≈34.6h | ≈28.8h | ≈17.3h | ≈9.9h | ≈8.6h | ≈4.9h | ≈3.3h |
| Handsfree 1 | 268.8 | ≈5.6h | ≈3.4h | ≈2.8h | ≈1.7h | Not supported | Not supported | Not supported | Not supported |
| Handsfree 2 | 512 | ≈10h | ≈6h | ≈5h | ≈3h | Not supported | Not supported | Not supported | Not supported |
Estimates assume ~80% real-world solar yield (weather, angle, wiring). “Not supported” indicates the panel array exceeds the unit’s rated solar input.
At Exode Explore, we select the most durable portable power stations for adventure, camping, and overlanding. Whether you're looking for a lightweight portable battery or a powerful portable power station, you'll find the best models from Bluetti, Ecoflow, and Jackery here, tested to withstand Canada's climate.
The Best Portable Solar Generators and Power Stations in Canada
What other campers often buy with this:
Don't miss out on our best offers
Be the first to receive our promotions and new products
+1 438 842 5878
Price are in $CAD